Industrial Gas Detector for Chlorine (CL2); designed for harsh environments.
|Enclosure||Polycarbonate: Injection-molded, NEMA 3RX washdown duty, with hunged lid and captive screw
Stainless Steel: 18 GA, NEMA 3RX washdown duty, with hinged lid and captive screw
|Dimensions||7.7″ H x 6.7″ W x 3.8″ D|
|Wiring Connection||3-conductor, shielded, stranded, ≥ 20 AWG cable (Belden 8772 or equivalent) up to 1500 ft|
|Terminal Block Plug (Field Wiring)||26-12 AWG, torque 4.5 lbs-in|
|Output Signal||4-20 mA linear output|
|Input Power||+24 vdc|
|Response Time||T50: < 60 seconds | T90: < 90 seconds|
|Zero Drift / month||< 0.1% full scale|
|Span Drift / month||< 3% full scale|
|Repeatability||+/- 1% full scale|
|Operating Temperature||-50°F to +122°F|
|Operating Humidity||5-100% condensing|
|Certification||SGS listed to UL 61010-1, and CSA C22.2 No. 61010-1-12|
|Warranty||2 years sensing element and transmitter|
The GG-CL2-B utilizes proven electrochemical sensor technology for fast and accurate detection. The standard detection range of the GG-CL2-B provides real-time continuous monitoring of chlorine concentrations accurately down to 0.5 ppm, with no false alarms. The intelligent internal temperature control of the GG-CL2-B provides optimum temperature control for extended cell life. The high-quality injection-molded polycarbonate enclosure offers excellent chemical corrosion protection and high impact
resistance. The GG-CL2-B provides an industry standard linear 4-20 mA output signal compatible with most gas detection systems and PLCs. The output signal is not affected by drastic temperature variations or other atmospheric conditions.
The standard GG-CL2-B sensor is designed to work anywhere, and at a lower base-model price than most competing models. With only one electrochemical sensor for any application; designing, ordering, and maintaining your chlorine detection system is simple.
The GG-CL2-B is prepared to survive in just about any harsh industrial condition, including acid washdown of processing areas. Every circuit board is sealed forever in potting compound, protecting electronic components and copper tracing from corrosion. A specially vented chemical-resistant polycarbonate enclosure protects the sensor from accidental damage, weather, and direct hose-hits from clean-up crews.
GG-O2 Oxygen Gas Detector
GG-SO2 Sulfur Dioxide Gas Detector
GG-H2 Hydrogen Gas Detector
GG-O3 Ozone Gas Detector
DuoSense Modbus vehicle emissions monitor