GG-6 Expansion Module.
Adds (8) 4/20 mA inputs, and (8) relay outputs to the GG-6 controller. Maximum of 3 GG-XM for each GG-6 controller.
Includes expansion module with harness interconnect, eight 10A relay outputs, and 4A power supply.
Simple setup and configuration through menu on GG-6.
Weatherproof NEMA 4X polycarbonate enclosure safe for outdoors and wash-down areas.
Must be mounted close to GG-6 and includes a 3 foot interconnect cable. Optional 72″ interconnect cable found under equipment options.

Size	15.8″ high x 14″ wide x 7″ deep
Weight	12.0 lbs
AC Power Requirements	110vac @ 3A
DC Power available	24vdc @ 6.5A
Temperature Range	0F to +122F (-18C to +50C)
Relay Outputs	(8) fully programmable
Features	Calibration Mode, Relay Test Function, Adjustable warn and alarm setpoints, Alarm Log, adjustable relay latch/non-latch, downscale alarm setting for O2 monitoring, horn silence button, *All features require a GG-6.
Certification	SGS listed to UL 61010-1, and CSA C22.2 No. 61010-1-12
Warranty	2 years sensing element and transmitter

GG-XM 72" interconnect cable

View Product

GG-XM Analog Output Board

View Product

GG-6 Auxiliary Power Supply

View Product

The GG-6 can interface to, but operate independently of plant control systems for a reliable stand-alone safety system. The GG-6 comes standard with six onboard relays, as well as an onboard buzzer. One relay is a dedicated programmable horn relay, the other five relays are user programmable to trigger upon any event for any sensor or group of sensors.

The GG-XM expansion module accommodates an additional eight sensors for each module, and up to three modules for a total of 30 sensors. Each GGXM comes equipped with eight 4-20 mA inputs, eight programmable relays, and its own power supply. Analog output boards can be added on to the controller and expansion modules, and can be connected to your plant PLC or other 4-20 mA control panel.

The watertight fiberglass reinforced enclosure will stand up to corrosive washdown, temperature swings, and any other harsh environment encountered in the food industry. The GG-XM’s connect to the GG-6 and/or each other via a 24” wire harness. Since the alarm log holds 10,000 events, yesterday’s events will not go unnoticed.

The GG-6 controller utilizes a userfriendly LCD operator interface for all readout information and alarm function control. Out of the box, the controller and expansion modules are configured with default setpoints loaded in the software. Easily enter the
zone location names and adjust alarm setpoints as necessary. The backlit LCD displays real-time status of gas sensor concentrations and allows for custom programming via a user-friendly menu system. The GG-6 and expansion modules are compatible with all gas sensors with industry standard 4-20 mA inputs.

The power supplies are powerful enough to power all connected sensors and external 24 VDC Horn/Strobes. All wiring is safely enclosed inside and easily accessed from the hinged lids. Each expansion module connects to the GG-6 in a daisy-chain configuration. Wiring is simply plugging in a wiring harness. All human interfacing is performed via the waterproof membrane keys on the outside of the GG-6, for non-intrusive operation.

GG-6 Expansion Module